CONCEPTUAL DESIGN OF A HEAT PIPE SOLAR RECEIVER GAS TURBINE PLANT, FINAL REPORT

by FOSTER WHEELER DEVELOPMENT CORPORATION,

Technical Report, 1978

Barcode

CSP Unique ID 190683346

Status

Electronic Resource

Call number

**Click on MARC view for more information on this report.**

Publication

FWDC 9 41 341106 SOL 844; Report; September 1978.

Language

Library's review

ABSTRACT:
A conceptual design for a 10-MWe Heat Pipe Central Receiver Gas-Turbine Power Plant has been developed. The heat pipe central solar receiver uses heat pipes to transform the concentrated high solar heat flux at the receiver into a lower heat flux compatible with gas heat-transfer systems.
Show More
Several Brayton cycles were studied to determine which cycles and operating conditions are technically and economically most viable for a central receiver power plant. A regenerative open-gas cycle with an inlet turbine temperature of 816°C (1500°F) was selected.

The turbine-generator and receiver are located at the top of a steel tower, with a north field of 2-axis tracking heliostats. The system can be adapted for operation as a hybrid plant, providing a higher level of availability and a dependable generating capacity--important considerations from the utility point of view.

The predicted cycle efficiency is 33 to 38 percent, and the overall solar-to-electric efficiency is 19.1 to 22.3 percent. Capital cost of the plant is estimated to be in the $1,947 to $2,002/kW range, depending on the assumed cost for the collector system. Compared with a water/steam solar system, estimated costs in mid-1978 dollars are lower and plant efficiency is superior.
Show Less
Page: 0.223 seconds