Tunturi F20 Upright Bike

by Staff at Tunturi

Paper Book, 2020

Status

Available

Library's review

Manual til en motionscykel, Tunturi F20.

Tekstuddrag:
F20 Upright Bike
GB User manual

Tunturi Upright Bike F20
SKU 17TBF20000

MAX USER WEIGHT: 120 KG
264 LBS

CE EN957
Class HC

HOME USE

www.tunturi.com

MADE IN CHINA

Serial number:

Attention, Achtung, Attention, Attentie, Attenzione, Atención, Giv akt, Huomio
-
Show More
Please read this Owner's manual before assembling this product.

Index
Upright Bike
Safety warnings
Assembly instructions
Description (fig. A)
Package contents (fig. B & C)
Assembly (fig. D)
Use
Replacing the batteries (Fig. E)
Additional information
Warranty
Declaration of the manufacturer
Disclaimer

Upright Bike
Important Safety instructions
This Owner's Manual is an essential part of your
training equipment: reading all instructions in
this manual before you start using this appliance.
The following precautions must always be followed:

Safety warnings
WARNING
Read the safety warnings and the instructions.
Failure to follow the safety warnings and the
instructions can cause personal injury or damage
to the equipment. Keep the safety warnings and
the instructions for future reference.

WARNING
Heart rate monitoring systems may be inaccurate.
Over exercise may result in serious injury or death.
If you feel faint stop exercising immediately.

- The equipment is suitable for domestic use only.
- The equipment is not suitable for commercial use.
- Max. usage is limited to 3 hrs a day.
- The use of this equipment by children or persons
with a physical, sensory, mental or motorial
disability, or lack of experience and knowledge can
give cause to hazards. Persons responsible for their
safety must give explicit instructions or supervise
the use of the equipment.
- Before starting your workout, consult a physician to
check your health.
- If you experience nausea, dizziness or other
abnormal symptoms, immediately stop your
workout and consult a physician.
- To avoid muscular pain and strain, start each
workout by warming up and finish each workout by
cooling down. Remember to stretch at the end of
the workout.
- The equipment is suitable for indoor use only. The
equipment is not suitable for outdoor use.
- Only use the equipment in environments with
adequate ventilation.
- Do not use the equipment in
draughty environments in order not to catch a cold.
- Only use the equipment in environments with
ambient temperatures between 10°C~35°C / 50°F~95°F.
Only store the equipment in
environments with ambient temperatures between
5°C~45°C / 41°F~113°F.
- Do not use or store the equipment in humid
surroundings. The air humidity must never be more
than 80%.
- Only use the equipment for its intended purpose.
Do not use the equipment for other purposes than
described in the manual.
- Do not use the equipment if any part is damaged or
defective. If a part is damaged or defective, contact
your dealer.
- Keep your hands, feet and other body parts away
from the moving parts.
- Keep your hair away from the moving parts.
- Wear appropriate clothing and shoes.
- Keep clothing, jewelry and other objects away from
the moving parts.
- Make sure that only one person uses the equipment
at a time. The equipment must not be used by
persons weighing more than 120 kg (264 lbs).
- Do not open equipment without consulting your
dealer.

Assembly instructions
Description (fig. A)
Your upright bike is a piece of stationary fitness
equipment used to simulate cycling without causing
excessive pressure to the joints.

Package contents (fig. B & C)
The package contains the parts as shown in fig. B.
The package contains the fasteners as shown in fig. C.
Refer to the section "Description"

!! NOTE
If a part is missing, contact your dealer.

Assembly (fig. D)
WARNING
Assemble the equipment in the given order.
Carry and move the equipment with at least two persons.

CAUTION
Place the equipment on a firm, level surface.
Place the equipment on a protective base to
prevent damage to the floor surface.
Allow at least 100 cm of clearance around the
equipment.
Refer to the illustrations for the correct assembly
of the equipment.

!! NOTE
Save the tools provided with this product, after
you completed the product assembly, for future
service purposes.

Use
Adjusting the support feet
The equipment is equipped with 4 support feet. If the
equipment is not stable, the support feet can be adjusted.
Turn the support feet as required to put the
equipment in a stable position.
Tighten the locknuts to lock the support feet.
!! NOTE
The machine is the most stable when all support
feet are turned fully in. Therefore start to level
the machine by turning all support feet fully in,
before turning out the required support feet to
stable the machine.

Adjusting resistance
To increase or decrease resistance, turn the adjustment
knob at the top of the handlebar support tube
clockwise (+ direction) to increase resistance and
counterclockwise (- direction) to decrease resistance.
The scale above the knob (1-8) helps you find and set
a suitable resistance.

Adjusting the console
The console can be adjusted according to the height
and the exercise position of the user.
Loosen the console adjustment knob.
Move the console to the required position.
Tighten the console adjustment knob.

Adjusting the horizontal seat position
The horizontal seat position can be adjusted by setting
the seat to the required position.
Loosen the seat adjustment knob.
Move the seat to the required position.
Tighten the seat adjustment knob.

Adjusting the vertical seat position
The vertical seat position can be adjusted by setting the
seat tube to the required position. With the leg almost
straight, the arch of the foot must touch the pedal at its
lowermost point.
Loosen the seat tube adjustment knob.
Move the seat tube to the required position.
Tighten the seat tube adjustment knob.

Adjusting the handlebar
The handlebar can be adjusted according to the height
and the exercise position of the user.
Loosen the handlebar adjustment knob.
Move the handlebar to the required position.
Tighten the handlebar adjustment knob.

Replacing the batteries (Fig. E)
The console is equipped with 2 AA batteries at the rear
of the console.
Remove the cover.
Remove the old batteries.
Insert the new batteries. Make sure that batteries
match the (+) and (-) polarity markings.
Mount the cover.

Additional information
Packaging disposal
Government guidelines ask that we reduce the amount
of waste material disposed of in land fill sites. We
therefore ask that you dispose of all packaging waste
responsibly at public recycling centres.
End of life disposal
We at Tunturi hope you enjoy many years of enjoyable
use from your fitness trainer. However, a time will come
when your fitness trainer will come to the end of its
useful life. Under European WEEE Legislation you are
responsible for the appropriate disposal of your fitness
trainer to a recognised public collection facility.

Warranty
Tunturi purchaser's warranty
Warranty terms

The consumer is entitled to the applicable legal
rights stated in the national legislation concerning the
commerce of consumer goods. This warranty does not
restrict these rights. The Purchaser's Warranty is only
valid if the item is used in an environment approved by
Tunturi New Fitness BV for that particular equipment.
The product-specific approved environment is stated in
the Owner's Manual provided with your equipment.

Declaration of the manufacturer
Tunturi New Fitness BV declares that the product is in
conformity with the following standards and directives:
EN 957 (HB), 89/336/EEC. The product therefore carries
the CE label.

04-2020

Tunturi New Fitness BV
Purmerweg 1
1311 XE Almere
The Netherlands

Disclaimer
© 2020 Tunturi New Fitness BV
All rights reserved.
The product and the manual are subject to change.
Specifications can be changed without further notice.

Cyklen kommer med denne meget neddroslede samlevejledning og brugermanual. Man kan finde meget mere detaljerede versioner på www.tunturi.com, hvilket er helt fint.
Show Less

Publication

Tunturi, 2020

Language

Original language

English

Physical description

35 p.; 28.4 cm

Local notes

Omslag: Staff at Tunturi
Omslaget viser en motionscykel, teksten Tunturi F20 Upright Bike og de 8 sprog som denne simple manual indeholder
Indskannet omslag - N650U - 150 dpi
En drivrem faldt af ved første anvendelse af cyklen (formentlig fordi fragtmanden havde vendt pakken forkert). Men man kan ret let løfte skærmen af og række en arm indenfor, når man har skruet de tre skruer i siden af og de to lange bolte, der holder bageste fod. Så efter lidt konsultation med aplus.dk og lidt ekstra bøvl, virker cyklen nu upåklageligt.

Pages

35

Library's rating

Rating

(1 rating; 3)
Page: 0.3165 seconds